Advertisement
Quick Links
Advertisement
Related Manuals for Wesco WS2355KU
Summary of Contents for Wesco WS2355KU
- Page 1 WS2355KU (CMT18W) Cordless Oscillation Tool...
- Page 3 Fig.A2 Fig.A1 Fig.B Fig.A3 100% Fig.D Fig.C Fig.E2 Fig.E1...
- Page 4 Fig.E2 Fig.E1 Fig.G Fig.F Fig.H Fig.I...
-
Page 5: Product Safety
PRODUCT SAFETY modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. WARNING: Some dust created by power sanding, Unmodified plugs and matching outlets will reduce risk sawing, grinding, drilling and other construction of electric shock. - Page 6 moving parts. Loose clothes, jewellery or long hair can 5) BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the be caught in moving parts. g) If devices are provided for the connection of dust manufacturer. A charger that is suitable for one type extraction and collection facilities, ensure these of battery pack may create a risk of fire when used with are connected and properly used.
-
Page 7: Safety Warnings For Battery Pack
support the workpiece to a stable platform. Holding (68°F ± 9°F ). r) When disposing of battery packs, keep battery the work by hand or against your body leaves it unstable and may lead to loss of control. packs of different electrochemical systems separate from each other. - Page 8 • Consult the dealer or an experienced radio/TV technician for help. SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem.
-
Page 9: Component List
Battery pack release button Battery pack Variable speed control Venting slot LED light Flange TECHNICAL DATA Type WS2355KU (2355 - designation of machinery, representative of cordless multi- function tool) Voltage Max* No load speed 5000-20000/min Oscillations angle 3.0° Machine weight 2.65lbs... - Page 10 OPERATION INSTRUCTIONS power tool on. This provides for good adhesion and prevents premature wear. NOTE: Before using the tool, read the instruction 4) If one point has become worn, pull off the sanding book carefully. paper, turn it 120° and place it on again. INTENDED USE BEFORE PUTTING INTO OPERATION The power tool is intended for sawing and separating...
- Page 11 4. TO INSTALL THE BATTERY PACK (SEE FIG. E2) cover sanding pad wear and tear. Slide the fully charged battery pack onto the tool with 7. Use coarse grit paper to sand rough surfaces, sufficient force until it clicks into position. medium grit for smooth surfaces and fine grit for finishing surfaces.
- Page 12 APPLICATION WARNING: The sawing teeth are very sharp. Do not touch during mounting and application. The workpiece must be clamped tightly before it is cut. Description Application Universal Metal/Wood End Cut Blade Wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, hardened fillers Sawing Standard Wood End Cut Blade Wood, plastic, drywall...
- Page 13 Supplier’s Declaration of Conformity Product Description: Battery charger Model Number: WS9924U Trade Name: WESCO This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.