Graco E Series Operation page 13

Motor ON/OFF Key/LED
Press to turn motor ON and OFF. Also clears
some motor control diagnostic codes, see page 35.
PARK Key/LED
Press at end of day to cycle component A pump
to home position, submerging displacement rod. Trigger
gun until pump stops. Once parked, motor will automati-
cally shut off.
PSI/BAR Keys/LEDs
PSI BAR
Press or to change pressure scale.
Pressure Key/LED
Press to display fluid pressure.
If pressures are imbalanced, display shows higher
of two pressures.
309551C
Cycle Count Key/LED
Press to display cycle count.
To clear counter, press and hold
Pressure Arrow Keys
Press or to adjust fluid pressure when
motor is ON. Setpoint displays for 10 sec.
When motor is OFF, pressing
To exit jog mode, press
dashes or current pressure.
Pressure/Cycle Display
Shows fluid pressure or cycle count, depending on
mode selected.
Displays J 1 through J 10 when in jog mode, page 34.
Motor Controls and Indicators
for 3 sec.
will enter jog mode.
until display shows
13