Table of Contents
Advertisement
This screen can also be invoked from Local Com and the duration in this case is
user defined.
If the "select" button is pressed on "Flow Test Running" screen, it
aborts the test and the UI changes to this "Flow Test Abort" screen.
If the "select" button is pressed here, we can start the flow test
again.
After the flow test is competed successfully, the UI changes to
"Flow Test Competed" screen. T_e will be the time given by the user
or 120 seconds (if the test starts from the service screen menu); T_r
will be 0, N, V as per the pulses and volume values that were
provided. If the "select" button is pressed here, the UI will change to
the "Flow Test Start" screen.
44
Advertisement
Table of Contents
