Disassembly method
Removing the amplifier assembly
1.
Remove the eleven screws A attaching the amplifier
assembly.
2.
Remove the amplifier assembly to the front from the
cabinet.
3.
Remove the connection of the wire connector at the
back side of the amplifier assembly.
4.
Remove the connection of the speaker wire from the
speaker terminal at the back side of the amplifier
assembly.
Removing the rear panel
Prior to performing the following procedures, remove
the amplifier assembly.
Remove the volume nob & frequency nob.
1.
Remove the seven screws B attaching the rear
2.
panel.
(See Fig. 1, 2)
Amplifier
Assembly
(See Fig. 3)
A
Cabinet
Fig.1
Cabinet
Wire connecter
Amplifier
Volume nob
Assembly
B
SX-DW303
A
A
Amplifier
Assembly
A
Speaker
terminal
Fig.2
Frequency nob
B
Fig.3
Rear panel
1-3