Page 1
SX-DW303 SERVICE MANUAL POWERED SUBWOOFER SX-DW303 Area Suffix E --- Continental Europe Contents Safety precautions 1- 2 Disassembly method 1- 3 Description of major ICs 1- 6~7 No.21177 COPYRIGHT 2002 VICTOR COMPANY OF JAPAN, LTD. Oct. 2002...
Page 2
SX-DW303 1. This design of this product contains special hardware and many circuits and components specially for safety purposes. For continued protection, no changes should be made to the original design unless authorized in writing by the manufacturer. Replacement parts must be identical to those used in the original circuits. Services should be performed by qualified personnel only.
SX-DW303 Disassembly method Removing the amplifier assembly (See Fig. 1, 2) Remove the eleven screws A attaching the amplifier assembly. Remove the amplifier assembly to the front from the cabinet. Remove the connection of the wire connector at the back side of the amplifier assembly.
SX-DW303 Removing the power cord (See Fig.4, 5) Prior to performing the following procedures, remove the rear panel. Remove the two screw marked C attaching the bracket a. Pull out the bracket a toward you. Remove the connection of the wire connector...
Page 5
SX-DW303 Removing the Bottom plate (See Fig.7, 8) Remove the three sheets of the cushion sheet marked G. Remove the six screws marked H attaching the bottom plate. Remove the two screws marked I attaching the bottom plate. Bottom Pull out the bottom plate toward you.
Page 8
SX-DW303 VICTOR COMPANY OF JAPAN, LIMITED AUDIO & COMMUNICATION BUSINESS DIVISION PERSONAL & MOBILE NETWORK BUSINESS UNIT. 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan Printed in Japan (No.21177) 200210...