Disassembly - JVC SP-DW103 Service Manual

3.1 Disassembly method
3.1.1 Removing the Amplifier assembly.
(See Fig1 and 2.)
(1) Remove the eleven screws A attaching the amplifier as-
sembly. (See Fig 1.)
(2) Remove the amplifier assembly from the main body.
(3) Disconnect the wire connector from the back side of the
amplifier assembly. (See Fig 2.)
(4) Disconnect the speaker wire from the speaker terminal.
(See Fig 2.)
3.1.2 Removing the back panel.
(See Fig 3.)
(1) From the back side of the main body pull out the volume
and frequency knobs.
(2) Remove the seven screws B attaching the back panel.
SECTION 3

DISASSEMBLY

A
A
Amplifier assembly
B
Amplifier assembly
A
Fig.1
Wire connector
Speaker terminal
Fig.2
Volume knob Frequency knob
B
B
Fig.3
A
A
(No.22056)1-5