Connecting Method Ç; Connecting Method I - JVC SX-DW303AC Instructions Manual

Connecting Method ı
Connect an amplifier having line output jacks to the INPUT 1
(LOW-LEVEL) terminal.
Preparation:
Purchase a stereo audio cord at
an audio shop or electric shop.
Main (Front) Speakers
(not supplied)
Your Amplifier
VOLUME FREQUENCY
MIN
50Hz
MAX
200Hz
AUTO POWER ON/STANDBY CUT OFF FILTER
ON VARIABLE
CANCEL FIXED
PHASE
RIGHT LEFT/MONO
NORMAL
REVERSE INPUT 1
(LOW-LEVEL)
RIGHT LEFT
INPUT 2
(HIGH-LEVEL)
TO MAIN
SPEAKERS
RIGHT LEFT
POWER
OFF ON
SX-DW303
If your amplifier has only a monaural line output (MONO)
jack, connect it to the LEFT/MONO jack of the INPUT 1
(LOW-LEVEL) terminal (see Connecting Method Å).
Connecting Method Ç
Connect an amplifier without a subwoofer output jack and line
output jacks to the INPUT 2 (HIGH-LEVEL) terminal.
• When this method is used, connect your main (front) speakers
to the TO MAIN SPEAKERS terminal on the rear of this unit.
Preparation:
Purchase speaker cords at an
audio shop or electric shop.
LINE OUT
L
R
Stereo audio cord
(not supplied)
RIGHT LEFT/MONO
INPUT 1
(LOW-LEVEL)
To an AC outlet
Your Amplifier
VOLUME FREQUENCY
MIN
50Hz
MAX
200Hz
AUTO POWER ON/STANDBY CUT OFF FILTER
ON VARIABLE
CANCEL FIXED
PHASE
RIGHT LEFT/MONO
NORMAL
REVERSE INPUT 1
(LOW-LEVEL)
RIGHT LEFT
INPUT 2
(HIGH-LEVEL)
TO MAIN
SPEAKERS
RIGHT LEFT
POWER
OFF ON
SX-DW303
To an AC
outlet
Main (Front) Speakers
(not supplied)
Right speaker
How to connect the speaker cords:
1 Press and hold the clamp of the speaker terminal.
2 Insert the end of the speaker cord into the terminal as
illustrated below.
• Match the polarity of the speaker terminals: ª to ª and ·
to ·.
3 Release the finger from the clamp.
1
• When you connect main (front) speakers to the TO MAIN
SPEAKERS terminal, use the speakers within the
impedance range indicated by the amplifier connected to
the INPUT 2 (HIGH-LEVEL) terminal. If not, the amplifier
connected to the INPUT 2 (HIGH-LEVEL) terminal may
malfunction and be damaged.
• DO NOT connect more than one speaker to one speaker
terminal.
– 5 –
FRONT SPEAKERS
RIGHT
Speaker cords
(not supplied)
RIGHT LEFT
INPUT 2
(HIGH-LEVEL)
TO MAIN
SPEAKERS
RIGHT LEFT
Speaker cords
(not supplied)
Left speaker
2 3
LEFT