Table of Contents
Advertisement
• Make sure to install a 480 GB M.2 drive into the M.2 backplane that supports two M.2 drives.
Figure 62. M.2 drive slots
Table 60. M.2 drive slots
1
Slot 0
2
Slot 1
Step 2.
Insert the M.2 drive at an angle (approximately 30 degrees) into the connector and rotate it until the
notch catches on the lip of the retainer; then, slide the retainer forward (toward the connector) to
secure the M.2 drive in the M.2 backplane.
Figure 63. M.2 drive installation
Attention: When sliding the retainer forward, make sure the two nubs on the retainer enter the
small holes on the M.2 backplane. Once they enter the holes, you will hear a soft "click" sound.
.
Chapter 3
Server hardware setup
87
Advertisement
Table of Contents
