Table of Contents
Advertisement
• 2.5-inch SATA/SAS 8-bay backplane (referred to as "8-bay backplane")
• 2.5-inch AnyBay 8-bay backplane (referred to as "AnyBay backplane")
Connecting signal cables to one backplane
When one backplane is installed, see the following illustrations for cable routing.
One 8-bay backplane
Figure 27. Cable routing, 8-bay backplane
Table 22. Cables and adapters for routing
SATA/SAS RAID adapter (8i)
SATA/SAS signal cables (720 mm)
1
2
One AnyBay backplane
Note: Install the processor and memory expansion tray before connecting the signal cables to NVMe
connectors on the expansion tray (see
"Install the processor and memory expansion tray" on page
90).
.
Chapter 2
Server components
33
Advertisement
Table of Contents
