Table of Contents
Advertisement
4
YOCTO SOFTWARE SETUP
Introduction
This Development Guide describes the way to set up the essential development
environment, so that users can customize the Yocto source code and come up
with their own image for the ESOM-MT-500.
4.1 BSP Installation
The following are contents in the BSP package.
ESOM-MT-500-BSP_Yocto26.zip
Driver_Auto_Installer_EXE.zip
UniversalAdbDriverSetup.zip
SP_Flash_Tool_exe_Windows.zip.zip
4.1.1 Version Information and Supported Features
• Kernel version: 4.4.146
• Evaluation image: Yocto 2.6
• Development based on MediaTek Yocto 2.6 BSP
• Supports eMMC boot
• Supports HDMI display
• Supports HDMI audio output
• Supports MIPI DSI capacitive touch panel
• AUO 10.1 B101UAN01.7 (1920×1200)
• eGalax I2C touch
• Supports COM1 as RS-232 mode (TX/RX) and COM as debug port
• Supports two 10/100Mbps Ethernet
• Supports MediaTek MT6358 Headphone and Mic-in
• Supports MediaTek MT7668 Wi-Fi 802.11ac and Bluetooth 5.0
• Supports EMIO-2574 (SIM7600JC-H) 4G LTE miniPCIe module
• Supports MIPI CSI OV5648 camera module
©Vecow ESOM-MT-500 User Manual
Source code folder
Tool folder
Description
Yocto source code and image
Description
MTK USB cable driver
Universal ADB driver
MTK SP Flash Tool
YOCTO SOFTWARE SETUP
36
Advertisement
Table of Contents
