Image Build - Vecow ESOM-MT-500 User Manual

3.3 Image Build

This section explains how to use the source code to build the image for the
firmware installer on the ESOM-MT-500.
3.3.1 Building the Android Image
Type below commands for the image building.
$ cd android10
$ source build/envsetup.sh; lunch full_tb8788p1_64_wifi-
userdebug
$ make 2>&1 | tee build.log
3.3.2 Replace and Update Firmware
After the compilation, the /android10/out/target/product/tb8788p1_64_wifi/
directory will contain the resulting binaries as shown in the table below.
preloader_tb8788p1_64_wifi.bin
recovery.img
vbmeta.img
vbmeta_system.img
vbmeta_vendor.img
spmfw-verified.img
scp-verified.img
sspm-verified.img
cam_vpu1-verified.img
cam_vpu2-verified.img
cam_vpu3-verified.img
lk-verified.img
boot.img
logo-verified.bin
dtbo-verified.img
tee-verified.img
super.img
cache.img
userdata.img
©Vecow ESOM-MT-500 User Manual
Binary
ANDROID SOFTWARE SETUP 35