Table of Contents
Advertisement
Overview of this manual
About this manual
This manual describes the scalable I/O devices and contains instructions for the
configuration.
Usage
This manual should be used during installation and configuration of the scalable
I/O devices.
Who should read this manual?
This manual is intended for
Prerequisites
The reader should have the required knowledge of
References
Document references
Reference
Operating manual - RobotStudio
Operating manual - OmniCore
Operating manual - Integrator's guide OmniCore
Product manual - OmniCore C30
Product manual - OmniCore C90XT
Product manual - OmniCore V250XT
Application manual - Scalable I/O
3HAC070208-001 Revision: F
Note
It is the responsibility of the integrator to provide safety and user guides for the
robot system.
Note
Before any work on or with the robot is performed, the safety information in the
product manual for the controller and manipulator must be read.
•
Personnel responsible for installations and configurations of industrial network
hardware/software
•
Personnel responsible for I/O system configuration
•
System integrators
•
Mechanical installation work
•
Electrical installation work
•
System parameters and how to configure them
•
RobotStudio
© Copyright 2019-2022 ABB. All rights reserved.
Overview of this manual
Document ID
3HAC032104-001
3HAC065036-001
3HAC065037-001
3HAC060860-001
3HAC073706-001
3HAC073447-001
Continues on next page
7
Advertisement
Table of Contents
