Elmo PX-10E Instruction Manual page 33

Visual presenter
Hide thumbs Also See for PX-10E:
Table of Contents

Advertisement

CONTOUR CORRECT
To enhances the edge of the image. (0~10: 11 levels) Default value 5(⇒P.30)
As the value gets smaller, the image becomes softer. As the value gets larger, the image becomes
sharper.
While the image gets sharper by setting to a larger value, it may take more time to process the image
or the file size may become large.
※ This function is available only when [Camera image] is selected in the Select image menu. ( ⇒P.26)
How to use CONTOUR CORRECT
Press the Settings button [
is displayed on the monitor. Select "CONTOUR CORRECT" from the "Image Quality Setting".
(⇒P.30)
CONTRAST
To increase the contrast of the image. (0~10: 11 levels) Default value 5
While the image gets sharper and becomes more vivid by setting to a larger value, the glare on the
image may increase.
How to use CONTRAST
Press the Settings button [
is displayed on the monitor. Select "Contrast" from the "Image Quality Setting".(⇒P.30)
TIME-LAPSE
To create a 1 second video by combining 30 photos taken at set intervals (1minute, 10minutes,
30minutes, 1hour, 3hours, 6hours).
For example:
When setting to 1minute ⇒ Record 30minutes = 30frames of images = Video length: 1second
When setting to 1hour ⇒ Record 1 week (168hours) = 168frames of images
CAUTION
・If the video file length exceed 2hours or video file size exceeds 4 GB, a new file will be created
automatically in the same project.
] on the operating panel while the camera image or a playback image
画入手
] on the operating panel while the camera image or a playback image
= Video length: 5.6seconds
33
RETURN
To return to the Image Quality
Setting menu.
DEFAULT To return the setting value to 5
(default value).
SLIDE
To set the edge enhancement
BAR
value by moving the slider. (0~
10)
SETTING
To display the current setting
VALUE
value.
RETURN
To return to the Image Quality
Setting menu.
DEFAULT
To return the setting value to 5
(default value).
SLIDE
To set the contrast value by moving
BAR
the slider. (0~10)
SETTING
To display the current setting value.
VALUE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Px-30e13751376

Table of Contents