Disassembly - Pioneer CDX-MG6056ZH Service Manual

CDX-MG6346ZH,MG6446ZH

7.1.2 DISASSEMBLY

- Removing the upper case (not shown)
1. Remove the five screws, then remove the upper
case.
- Removing the Extension Unit (Fig. 1)
1. Remove the three screws B, then remove the side
frame and holder.
2. Remove the screw C, screw D and PCB from the
connector.
3. Straighten the three currently bent claws, then
remove the extension unit.
- Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector,
then remove the grille assy.
- Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the
front frame.
2. Remove the three screws B and two screws C,
then remove the damper and holder.
3. Remove the two spring As, spring B and spring
C from the hook, then remove the CD mecha-
nism module.
– Precautions on Assembly –
Apply spring C (black) to the front
side hook.
Remaining springs A and B are to be
hung on the center hook.
- Removing the Keyboard Unit (Fig. 3)
1. Remove the screws A and four screws B, then
remove the keyboard unit.
2. Remove the four screws C, then remove the
guide.
52
Fig. 1
Fig. 2
Fig. 3