Pioneer CDX-MG6056ZH Service Manual page 63

CDX-MG6346ZH,MG6446ZH
SELECTING A CD
6 DISC IN-DASH CD CHANGER
Disc Number Buttons
EJECTING THE CD (1 of 2)
Eject Button
6 DISC IN-DASH CD CHANGER
Disc Number Buttons
EJECTING THE CD (con't)
Eject Button
6 DISC IN-DASH CD CHANGER
Disc Number Buttons
62
1
Disc status LED
1
Lights green
≠
Flashes orange
≠
Lights orange
Disc status LED
2
Disc status LED
Notes: • Pull the CD out. The LED flashes green and orange, and this product switches to the
CD loading standby mode.
• You can eject CDs even if the ignition is switched OFF. In this case, you cannot per-
form step ¡ to select a CD. When you press the eject button, the currently selected
CD is ejected.
Also, when you pull a CD out, the door immediately closes. (This unit does not switch
to the CD loading standby mode.)
Flashes orange
Press one of the buttons (1–6) to
select a desired CD for play.
• Green LED indicates CDs are stored and
orange LED indicates currently selected
CD.
• While CDs are being changed, the LED
flashes orange until CD changing has
been completed, then it lights orange.
• You can also select a desired CD by
using preset buttons or upward button on
the radio.
Press one of the buttons (1–6) to
select the disc number for the CD
you want to eject.
Then press eject button to eject the
CD.
• The LED flashes green and the CD is
ejected.
Note: If you do not remove the ejected CD
from the CD loading slot within about
15 seconds, it is automatically
reloaded. If you press the eject button,
or press the ejected CD's disc number
button (the Disc status LED that's
flashing green), the CD is immediately
reloaded.
Note: If you leave the ejected CD in the CD
loading slot, and press the disc
number button for a CD that's loaded
(the Disc status LED is lit green), the
ejected CD is reloaded and the CD
loaded in the disc number you
selected is ejected instead. This
function is convenient when the
ejected CD is different from the one
you want to eject.