Pioneer CDX-MG6056ZH Service Manual page 90

CX-890
(left) including the Loading motor.
8. Loosen the 4 screws. Remove the Motor bracket
assy and Photo interrupter.
9. Remove the 4 E-shaped rings (A) and 3 wash-
ers (B).
10. Remove the Mech lock lever (left).
11. Remove the 2 rollers (C).
12. Remove the Elevation lever (left). (Pay
attention to the mounting direction.)
13. Remove the Mech lock junction lever and
and roller (D).
(Pay attention to the mounting direction.)
14. Remove the 2 E-shaped rings (A) and 2 washers (B).
15. Remove the Elevation lever (right).
16. Remove the 2 rollers (C). (Pay attention to the
mounting direction.)
Stage mech assy
Photo interrupter
Motor bracket assy
17. Remove the Mech lock lever (right).
18. Lift up the Stage mech assy to remove it.
Mech lock lever (right)
Elevation lever (right)
Fig. 44
Fig. 42
Mech lock junction lever
Elevation lever (left)
Mech lock lever (left)
Fig. 43
Front