MEH-P5350
7.1.2 DISASSEMBLY
-
Removing the Case (not shown)
1. Remove the Case.
-
Removing the MD Mechanism Module (Fig.1)
Remove the four screws.
Disconnect the connector and then remove the MD
Mechanism Module.
-
Removing the Grille Assy (Fig.1)
Disconnect the three stoppers and then
remove the Grille Assy.
-
Removing the Tuner Amp Unit (Fig.2)
Remove the two screws.
Straight the tabs at four locations indicated.
Remove the three screws and then remove the
Tuner Amp Unit.
48
MD Mechanism Module
Grille Assy
Tuner Amp Unit
Fig.1
Fig.2