SUPPLEMENTAL INSTRUCTIONS FOR LFST-48
SPECIFICATIONS:
Model
Voltage
LFST-48
120/208-240
DIMENSIONS: Width: 48 7/8" (1241 mm), Depth: 27 1/8" (689 mm), Height: 30" (762 mm)
(Note: Dimensions include sign holders.)
MODEL DESCRIPTION:
The LFST-48 is a large capacity dry cabinet for displaying food product at proper serving
temperatures. This allows for food to be prepared in advance of peak serving periods, while placing
product in full-view to increase impulse sales.
Features include:
•
Four French-style self-closing glass doors
•
Display rack with three slanted shelves
•
Tempered glass sides
•
Incandescent lights to illuminate holding area
•
Sign holders on all four sides
•
Electronic Temperature Control
•
6' (1829 mm) cord and plug set attached
OPERATION:
1.
Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration.
2.
Position On/Off rocker switch in the ON position. Allow 20-30 minutes to reach operating temperature.
NOTE: Unit is equipped with an electronic temperature controller.
To adjust or set the temperature, place the red mode switch control knob at the SP-1 position
indicated on the controller.
Adjust the setpoint screw to the desired temperature. (Maximum setting is 220°F).
Turn the red mode switch control knob to the "TEMP" position to complete the programming.
CLEANING:
NOTE: Use only non-abrasive cleaners. Abrasive cleaners can scratch the finish of your unit marring
its appearance.
Clean daily with a soft, damp cloth.
Wipe off sign holder inserts using a soft, clean and damp cloth. Do not use glass cleaner. Glass
cleaner may scratch the polycarbonate surface.
Parts & Service Fax (800) 690-2966
January 2007
Watts
2150
HATCO CORPORATION
P.O. Box 340500, Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607
www.hatcocorp.com
Amps
14.6
(414) 671-6350
Int'l. Fax (414) 671-3976
Part number 07.04.408.00
Plug Configuration
NEMA L 14-20P