Download Print this page

Mercia Garden Products 02GARA0806-V1-PEFC General Instructions Manual

8x6 garage playhouse

Advertisement

Quick Links

General Instructions
02GARA0806-V1-PEFC
8x6 Garage Playhouse
BEFORE YOU START PLEASE THE READ INSTRUCTIONS CAREFULLY
- Check the pack and make sure you have all the parts listed in the parts list provided.
- When you are ready to start, make sure you have the right tools at hand (not supplied) including a
Phillips screwdriver, Flathead screwdriver, Stanley knife, Wood saw, Step ladder, Hammer, Spirit level and
a Drill with 2mm bit.
- Ensure there is plenty of space and a clean dry area for assembly.
- Ensure you have enough time to build the product to ensure the building is water tight.
TIMBER
As with all natural materials, timber can be a ected during various weather conditions. For the duration
of heavy or extended periods of rain, swelling of the wood panels may occur. Warping of the wood may
also occur during excessive dry spells due natural processes. Unfortunately, these processes cannot be
avoided but can be helped. It is suggested that the outdoor building is sprayed with water during
extended periods of hot weather and sheltered as much as possible during rain or snow.
Our buildings are pre treated with a water based treatment**; this only helps to prevent discolouration
whilst in stock. To validate your guarantee and ensure longevity of the product, it is ESSENTIAL the
building is treated with a suitable preservative in accordance with the manufacturers recommendations.
Care must be taken to ensure the product is placed on a suitable base.
We recommended using a suitable protection for your playhouse. As the product is destined for use by
children, a water based treatment that is EN71 tested for children is ESSENTIAL.
We also recommend treating the building prior to construction.
POSITIONING YOUR PLAYHOUSE
When thinking about where the building and base is going to be constructed:
Ensure that there will be access to all sides for maintenance work and annual treatment.
We recommend a minimum space of 2m around a playhouse, away from any structure or obstructions
such as fences, garages, houses, overhanging branches, washing lines or electrical wires.
It is recommended that the position of the Playhouse, Slide and Swing is not in direct sunlight.
Activity toys such as swings and slides for towers shall not be installed over concrete, asphalt or
any hard surface.
BUILDING A BASE
Ensure the base is level and is built on rm ground, to prevent distortion, checking with a spirit level.
Refer to diagrams for the base dimensions. The base should be slightly smaller than the external
measurement of the building, i.e. The cladding should overlap the base, creating a run o for water. It is
also recommended that the oor be at least 25mm above the surrounding ground level to avoid
ooding.
TYPES OF BASE
- Concrete 75mm laid on top of 75mm hard-core.
- Slabs laid on 50mm of sharp sand.
- Wooden base.
WARNING: Only for domestic use
Not suitable for children under 36 months due to
small parts and danger of falling from heights.
To be used under direct supervision of an adult
Please retain product label and instructions for future reference
WARNING
ONLY SUITABLE FOR DOMESTIC USE.
!
TO BE USED UNDER DIRECT SUPERVISION OF AN ADULT.
THIS PRODUCT SHOULD NOT BE MODIFIED IN ANY WAY. ANY MODIFICATIONS SHOULD BE
DETERMINED BY THE MANUFACTURER AND CARRIED OUT ACCORDING TO THE INSTRUCTIONS.
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY COMPONENT PARTS PRIOR TO ASSEMBLY.
MAX AGE OF 14 YEARS.
THIS TOY IS FOR OUTDOOR USE ONLY.
USE A WATER BASED TREATMENT THAT IS EN71 TESTED
CAUTION
Wood is a natural product and can change post manufacture. So despite every e ort being
made to ensure the material used are cut and machined to a clean and smooth nish, care
must be taken when handling the product and preparing for use by your child.
Any areas of concern, in the play areas, can be rubbed over with sandpaper to achieve a
smoother nish. Alternatively, call the customer service department who will be happy to
arrange replacement panels/parts.
All buildings should be erected by
x2
atleast two adults.
DO NOT ALLOW
CHILDREN TO ASSIST.
To prevent damage during
assembly, you MUST pilot
drill all screw holes and
ensure all screw heads are
2mm Drill bit
countersunk.
12mm CSK
Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens products
independently tested to EN71, we cannot accept responsibility for your safety whilst erecting this product.
**Protim Aquatan T
Your building has been treated with Aquatan.
Aquatan is a water-based concentrate which is diluted with water, the building as been treated by the correct application of
Aquatan solution and then allowed to dry.
Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and garden buildings.
Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl sulphosuccinat and
alcohols: 2, 4, 6-trichlorophenol.
In all instances for assistance with your product, please contact customer care on :
01636 880514 or customerservice@merciagp.co.uk
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
Winter = High Moisture = Expansion
Summer = Low Moisture = Contraction
For ease of assembly, you will
need a tape measure to check
dimensions of components.
www.merciagardenproducts.co.uk
P1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 02GARA0806-V1-PEFC and is the answer not in the manual?

Questions and answers

Summary of Contents for Mercia Garden Products 02GARA0806-V1-PEFC

  • Page 1 The cladding should overlap the base, creating a run o for water. It is 01636 880514 or customerservice@merciagp.co.uk also recommended that the oor be at least 25mm above the surrounding ground level to avoid ooding. Mercia Garden Products Limited, Sutton On Trent, TYPES OF BASE Newark, - Concrete 75mm laid on top of 75mm hard-core.
  • Page 2 02GARA0806-V1-PEFC Please retain product label and instructions for future reference Look for the symbols and follow the safety guidlines below. Ensure screw heads are sub ush and Ensure the screws are 12mm gap sand down any xed squarely and do surrounding the splinters created.
  • Page 3 Please retain product label and instructions for future reference Pre Assembly Nail Bag Before assembling remove the transportation Felt Tacks x10 blocks from the bottom of each panel. 20mm Screw x3 Take care removing the blocks as to not damage 30mm Screw x141 the panels.
  • Page 4 Please retain product label and instructions for future reference Please retain product label and instructions for future reference Step 2 Step 1 Parts needed - & & Parts needed - & Pre drill Pre drill hole hole Place the Floor panel (No. 1) onto a rm To x the Windows (No.
  • Page 5 Please retain product label and instructions for future reference Step 4 Step 6 Parts needed - & & & Parts needed - & & Pre drill Pre drill hole hole Assembly of the Door Panel (No. 2), Fix the back of the Door Panel (No. 2) Door (No.8) and Garage Doors x2 (No.11) against the sides of the Tall and Short 50kg...
  • Page 6 Please retain product label and instructions for future reference Step 8 Step 10 Parts needed - & Parts needed - Pre drill Pre drill hole hole Fix the Safety Rail (No. 9) suh to the side To make the Safety Rail secure, x the Railing of the Bunk Floor (No .6).
  • Page 7 Please retain product label and instructions for future reference Step 12 Step 14 Parts needed - & Pre drill Pre drill Place your ladder into position and x hole hole using 4x40mm screws. Fix the Fascia Blocks (No. 15) to the bottom of the Roof 50kg 50kg Fix into position as shown using...
  • Page 8 Please retain product label and instructions for future reference Step 18 Step 16 Parts needed - & Parts needed - Pre drill Pre drill hole hole Fix the Black Handle (No. 26) to each of Roll the Felt (No. 29) from front to back the Doors using 4x30mm black screws.
  • Page 9 Please retain product label and instructions for future reference It is ESSENTIAL that you apply wood treatment immediately after the building has been assembled. AFTER TREATMENT: score around protective cover on glazing and carefuly peel covering back Playhouse Maintenance: It is recommended that the following checks and maintenance are carried out at the begin- ning of each season as well as at regular intervals during the usage season.