Daikin Altherma 3 WS User Reference Manual page 36

4 | Operation
About energy prices in case of an incentive per kWh renewable energy
Example
User reference guide
36
Example: How to set the energy prices on the user interface?
Price
Electricity: 12 euro cents/kWh
To set the electricity price
1 Go to [7.5.1]/[7.5.2]/[7.5.3]: User settings > Electricity
price > High/Medium/Low.
2 Select the correct electricity price.
3 Confirm the changes.
4 Repeat this for all three electricity prices.
INFORMATION
Price value ranging from 0.00~990 valuta/kWh (with 2 significant values).
INFORMATION
If no schedule is set, the Electricity price for High is taken into account.
To set the electricity price schedule timer
1 Go to [7.5.4]: User settings > Electricity price >
Schedule.
2 Program the selection using the scheduling screen. You can set
the High, Medium and Low electricity prices according to your
electricity supplier.
3 Confirm the changes.
INFORMATION
The values correspond with the electricity price values for High, Medium and Low
previously set. If no schedule is set, the electricity price for High is taken into
account.
An incentive can be taken into account when setting the energy prices. Although
the running cost can increase, the total operation cost, taking into account the
reimbursement will be optimized.
NOTICE
Make sure to modify the setting of the energy prices at the end of the incentive
period.
To set the electricity price in case of an incentive per kWh renewable energy
Calculate the value for the electricity price with following formula:
▪ Actual electricity price+Incentive/kWh
For the procedure to set the electricity price, see
4
price" [ 36].
This is an example and the prices and/or values used in this example are NOT
accurate.
Value in breadcrumb
[7.5.1]=12
"To set the electricity
—
—
EWSAH/X06(U)D
Daikin Altherma 3 WS
4P675766-1 – 2022.04