DaVinci 94500977 Installation Instructions Manual page 7

2' Fireplace - Log Installation - continued

Install Log #6 as shown below. Place the hole in the bottom of Log #6 on the log locating pin installed on Log #5 in
the previous step. The other end of log #6 rests on log #1, just to the left of the knot.
Rests on log
Rests on pin

Install stone #35 as shown below. Make sure the stone does not rest over the burner.

Lift the charred left end of log #7 and install stone #13 under it as shown below.
NOTE: The right end of the log will still rest on the media tray.

Install stone #10 as shown below. Make sure the stone does not rest over the burner.
Page 7 of 22
DaVinci Birch Log Set
Installation Instructions
— 8/21/20
17602180
(sku# 94500977)
© Travis Industries, Inc.