4' Fireplace - Log Installation - continued
Install log #6 as shown below. The right pin on log #2 inserts into the hole on the thicker end of log #6. The other end of
log #6 rests on the left end of log #3 (no pin). Log # 6 angles to the left and spans the burner. Make sure the log is not over
the cluster of holes on the burner.
Install stone #10 to the left of log #1 as shown below.
Install stone #13 as shown below.
Page 15 of 22
DaVinci Birch Log Set
Installation Instructions
17602180
(sku# 94500977)
— 8/21/20
© Travis Industries, Inc.