DaVinci 94500977 Installation Instructions Manual page 19

5' Fireplace - Log Installation - continued

Install Log #5 as shown below. Place the wider end of the log #5 on charred portion of Log #1. Log #5 spans the
burner and the thinner, charred end is angled to the left and rests on the media tray.
NOTE: When a log placement requires the log to span the burner, make
sure the part of the log above the burner is not directly above a cluster of
holes (see illustration below).

Install log #8 as shown below. The pin on log #2 inserts into the hole on the bottom of log #8. The left end rests
on log #7 (no pin). Log #8 spans the burner (see below).

Install log #3 as shown below. The left pin on log #2 inserts into the hole on the bottom of log #3. The thicker end
of the log rests on the media tray. Log #3 spans the burner and angles to the left (see below).
Page 19 of 22
DaVinci Birch Log Set
Installation Instructions
— 8/21/20
17602180
(sku# 94500977)
© Travis Industries, Inc.