2' Fireplace - Log Installation - continued
Install Log #5 as shown below. Place the wider end of the log #5 on charred portion of Log #1. Log #5 spans the
burner and the thinner, charred end is angled to the right and rests on the media tray.
NOTE: When a log placement requires the log to span the burner, make
sure the part of the log above the burner is not directly above a
cluster of holes (see illustration below).
Install one of the included log locating pins into the leftmost hole on the top of log #5 as shown below.
Page 6 of 22
DaVinci Birch Log Set
Installation Instructions
— 8/21/20
17602180
(sku# 94500977)
© Travis Industries, Inc.