DaVinci 94500977 Installation Instructions Manual page 10

3' Fireplace - Log Installation – continued

Install Log #7 as shown below. The pin on the lower left log locating plate inserts into the hole on the bottom of
the log and the charred (right) end of the log rests on the end of log #2.

Install Log #6 as shown below. The log-locating pin on the left of Log #1 inserts into the hole on the bottom of log
#6. Log #6 spans the burner.
NOTE: When a log placement requires the log to span the burner, make
sure the part of the log above the burner is not directly above a cluster of
holes (see illustration below).

Install Log #8 as shown below. The log‐locating pin on the right of Log #2 inserts into the hole on the bottom of log #8. Log
#8 spans the burner and angles to the left (see below).
Page 10 of 22
DaVinci Birch Log Set
Installation Instructions
— 8/21/20
17602180
(sku# 94500977)
© Travis Industries, Inc.