Table of Contents
Advertisement
DaVinci Birch Log Set
Installation Instructions
(sku# 94500977)
2' Fireplace
2' Fireplace - Preparing the Media Tray
1. Remove the glass to gain access to the firebox (see manual for details).
2. Place the 2' Fireplace template on the burner as shown below.
NOTE: The holes in the template rest over the raised cluster of burner holes on each burner.
NOTE: Make sure the "L" and "R" are properly oriented, not reversed (if the letter is formed backward, turn the template
over).
3. Place the log placement plates in the punched out areas in the template that match their shape.
4. Secure the log placement plates to the media tray with the included screws.
5. Remove the template and dress the burner with crushed glass or rock embers (see appliance manual for details).
Do not overtighten the screws when securing the log placement plates to the media tray.
2R
2L
2' Fireplace - Overview:
Logs used for this installation: #1, #2, #5, #6, #7
Stones used for this installation: #10, #13, #35
Page 4 of 22
— 8/21/20
© Travis Industries, Inc.
17602180
Advertisement
Table of Contents
