Cisco MC16E Installation Manual page 3

The cards are inserted into and removed from the Cisco uBR10012 chassis as a single logical and
physical unit. All Cisco uBR10-LCP2-MC16x cable interface line cards support online insertion and
removal (OIR). OIR uses the MAC address assigned to the Cisco uBR10-LCP2 adapter card, allowing
you to replace any Cisco uBR-MC16x cable interface line card installed on the adapter card without
losing the configuration information.
Do not attempt to separate or remove the cable interface line card from the Cisco uBR10-LCP2 adapter
Note
card while they are inserted in the Cisco uBR10012 chassis. Remove the card from the chassis as a unit
and then separate them on a lab bench or other area that protects against ESD damage. See the
"Replacing the Line Card in the Cisco uBR10-LCP2 Adapter Card" section on page
Figure 1
Figure 1 Cisco uBR10-LCP2 Adapter Card with the Cisco uBR-MC16C Cable Interface Line Card Installed
The one downstream port and six upstream ports support the modulations shown in
Table 1 Cisco uBR10-LCP2-MC16C, E, and S Cable Interface Line Card Specifications
Cable Interface Line Card
Cisco uBR10-LCP2-MC16C
Cisco uBR10-LCP2-MC16E
Cisco uBR10-LCP2-MC16S
1. The Cisco uBR10-LCP2-MC16C cards support industry-standard F-connectors for the coaxial cable connections.
2. The Cisco uBR10-LCP2-MC16E cards support industry-standard F-connectors for the coaxial cable connections.
3. The Cisco uBR10-LCP2-MC16S cards support industry-standard F-connectors for the coaxial cable connections.
OL-2872-02
shows the Cisco uBR10-LCP2-MC16C cable interface line card.
u B
R -
M C
1 6
C
+ 4
2 d
B m
V
Cisco MC16C
cable line card
Downstream Modulation
1
64 QAM, 256 QAM
2
64 QAM, 256 QAM
3
64 QAM, 256 QAM
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Cable Interface Card for the Cisco uBR10012 Router
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Overview
Cisco uBR10-LCP2
adapter card
Upstream Modulation
QPSK, 16 QAM
QPSK, 16 QAM
QPSK, 16 QAM
23.
Table 1.
Output
+42 dBmV +/– 3dB
+40 dBmV +/– 3dB
+42 dBmV +/– 2dB
3