Cisco MC16E Installation Manual page 20

Removing and Replacing a Cisco uBR10-LCP2-MC16x Cable Interface Line Card
Figure 9
Installing the Cisco uBR10-LCP2-MC16x Cable Interface Line Card in the
Chassis
Ensure that you are properly grounded before handling the line card.
Step 1
Grasp the faceplate of the new cable interface line card with one hand and place your other hand under
Step 2
the card carrier (to support the weight of the card).
Verify that the ejector levers are perpendicular to the faceplate. See
Step 3
Carefully align the upper and lower edges of the cable interface line card with the upper and lower guides
Step 4
in the chassis, and slide the cable interface line card into the slot until you can feel it begin to seat in the
backplane connectors
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Cable Interface Card for the Cisco uBR10012 Router
20
Removing the Cable Interface Line Card
(Figure 10).
CI SC O
10 00 0 CI SC O
10 00 0 CI SC O
CI SC
10 00 0
10 0
Figure 8.
OL-2872-02