Hillsdale Furniture 1687-490 Quick Start Manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000

HARDWARE LIST

A (4) Long Allen Bolts
B (4) Short Allen Bolts
C (8) Flat Washers
D (8) Spring Washers
E (8) Hex Nuts
F (1) Allen Wrench

PARTS LIST

G (1) Headboard Panel
H (2) Finials
I (2) Leg Extensions
J (2) Adapter Plates
A A
A A
I
FIGURE 3
B B
J
B B
FIGURE 4

STEP 3 - Figure 2 - For Queen Size Only

Attach bed frame (*not included) to each Leg Extension (I) using 2 Long Allen Bolts (A) from the back side, 2 Flat
Washers (C), 2 Spring Washers (D) & 2 Hex Nuts (E) per side. Tighten all bolts using Allen Wrench (F) provided.
Discard remaining hardware ONLY IF this for Queen Size Headboard. See Steps 3 & 4 for Full Size Assembly ONLY.

STEP 4 - Figure 4

Attach Adapter Plate (J) to each Leg Extension (I) using 2 Long Allen Bolts (A), 2 Flat Washers (C), 2 Spring
Washers (D) & 2 Hex Nuts (E) per plate. Tighten all bolts.

STEP 5 - Figure 5

Attach bed frame (*not included) to each Adapter Plate (J) using 2 Short Allen Bolts (B), 2 Flat Washers (C), 2
Spring Washers (D) & 2 Hex Nuts (E) per plate. Tighten all bolts. The assembly is now complete.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
RUBY METAL HEADBOARD
A A
C C
A A
C C D D
I
FIGURE 2
C C
D D
E E
C C D D
E E
J
C C
D D
E E
I C C D D E E
Model #1687-490 Full / Queen
PART QTY
A 4
D D
E E
C 8
E 8
E E
FIGURE 1
BED FRAME NOT
INCLUDED
I

STEP 1 - Figure 1

Begin assembly by first attaching each Finial (H) to each
Post on Headboard Panel (G) by carefully screwing into
place. Do not overtighten to prevent stripping of the threads.

STEP 2 - Figure 1

Next attach each Leg Extension (I) to each post on
Headboard Panel (G) by firmly sliding into place.
HARDWARE PART QTY
B
D
F
G
Date: 07-22-2014
Page 1 of 1
HARDWARE
4
8
1
H
I