Hillsdale Furniture 1178-310 Assembly Instructions Manual

Universal junior bunk bed side panels/deck/rails

Advertisement

Quick Links

Keep these instructions for future reference.
!
IMPORTANT
!
To help prevent serious or fatal injuries from entrapment or falls:
Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove
warning label from bed.
Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment
or falls.
Use only mattress which is 74-75 inches long and 37-1/2 - 38-1/2 inches wide on upper and lower bunk. Ensure thickness
of mattress and foundation combined does not exceed 8 inches and that mattress surface is at least 5 inches (127 mm)
below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on the upper bunk at all times.
Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from
damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use the ladder for entering and leaving the upper bunk.
Contact the manufacturer or dealer for replacement parts.
Do not use substitute parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the guardrail
that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATON HAZARD - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed;
for example: but not limited to - hooks, belts, and jump ropes.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1178-310 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hillsdale Furniture 1178-310

  • Page 1 Keep these instructions for future reference. IMPORTANT To help prevent serious or fatal injuries from entrapment or falls: Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
  • Page 2 UNIVERSAL JUNIOR BUNK BED 05/05/10 Page 1 of 5 1178-310 Junior Bunk Bed - Side Panels FURNITURE, LLC. 1178-311 Junior Bunk Bed - Deck / Rails Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are in proper position, tight and free from damage.
  • Page 3 05/05/10 Page 2 of 5 STEP 1 Begin assembly by attaching the Top Deck (L) to the inside of each Open End Panel (J) and Full End Panel (K) by resting each hook in place, inserting each Square Lock Nut (E) into the sides of the Top Deck (L) and securing from the outside of both panels (J &...
  • Page 4 05/05/10 Page 3 of 5 STEP 2 Assemble the Half Mesh Panel (P) and Full Mesh Panel (N) below the Top Deck (L) from the top using 2 Allen Bolts (A) to secure in place. Do not fully tighten bolts. STEP 3 Assemble the Long Support Bars (R) and Short Support Bars (S) to the outside of the Half Mesh...
  • Page 5 05/05/10 Page 4 of 5 STEP 6 Attach each Side Rail (M) to the inside of the Open End & Full End Panels (J & K) by aligning holes and securing with 1 Allen Bolt (A) from the outside per each end. Do not fully tighten bolts for this step. STEP 7 Secure each Side Rail (M) to the top of the Top Deck (L) by aligning holes and securing from the bottom with 1 Allen Bolt (A) per each end.
  • Page 6 05/05/10 Page 5 of 5 STEP 8 Finally attach the Curtain (X) to the front side of your now assembled Junior Bunk Bed by strapping in place. The assembly is now complete. CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may cause damage to the finish.
  • Page 7 UNIVERSAL JUNIOR SHELF & STOOL Page 1 of 2 1178-312 Junior Shelf & Stool (sold w/1178-310/311) FURNITURE, LLC. Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are in proper position, tight and free from damage.
  • Page 8 05/05/10 Page 2 of 2 SHELF STEP 1 Begin assembly by attaching each Shelf Support (M) to the inside of each Shelf Arm (J) by aligning holes and securing with 2 Allen Bolts (C) per each side. Tighten all bolts. STEP 2 Attach the Wood Shelf (N) to the top of each Shelf Arm (L) and Shelf Support (M) with 6 Metal...

This manual is also suitable for:

1178-311

Table of Contents