Table of Contents
Advertisement
Page 4
SERIES 90
The Series 90 consists of system control components and one to thirty-two expansion cabinets to
accommodate scanner boards. See Figure 4. There are two models: the Series 90-S9, with a
nine-board Expansion Cabinet (which may be ordered with 1 to 9 boards); the Series 90-S32,
with a thirty-two board Expansion Cabinet (which may be ordered with 1 to 32 boards).
Additional 9 and 32-board Expansion Cabinets can be added, in any combination, to either
model. They may be ordered with partial or full complements of scanner boards.
SERIES 90HV
The Series 90HV consists of the same system control components and one to thirty-two
expansion cabinets to accommodate high-voltage scanner boards. There is only one model, the
Series 90HV-S23, with a 23-board expansion cabinet. It may be ordered with 1 to 23 high-
voltage, 64-point scanner boards. Additional 23-board expansion cabinets may house partial or
full complements of scanner boards.
Optional
Printer
SERIES 90 SYSTEM CONTROLLER
The Series 90/90HV system controller is based on a Pentium processor. The controller contains
a hard disk drive, CD ROM drive, and a 3.5-inch floppy disk drive. Human interface with the
controller is provided by a 101-key keyboard and a high-resolution color monitor.
controller communicates with the expansion cabinets through its high-speed serial port. A
parallel port is provided to accommodate an optional printer.
Monitor
System
Controller
Keyboard
Figure 4. Series 90/90HV Simplified Diagram
SYSTEM COMPONENTS
Expansion
Cabinet
Assembly
Expansion
Cabinet
Expansion
Cabinet
Series 90 Setup Manual
Under
Test
The
Advertisement
Table of Contents
