Making Connections; Keypad Port Connections - Russound CAA66K Installation Manual

The Keypad Ports are located on the back of
the CAA66 in the top left of center. Connections
at the Keypad Ports are made with RJ45 con-
nectors using T568A CAT-5 wire configuration.
For a clean installation when wiring from a
Keypad Port, use an RJ45 CAT-5 patch cable to
connect from the keypad port to an RJ-45 wall
plate (optional). Using the same RJ45 T568A
CAT-5 wiring configuration, use CAT-5 from the
RJ45 wall plate to the keypad.

MAKING CONNECTIONS

Keypad Port Connection
If using more than one keypad in a zone, use an
SA-ZX3 System Keypad Splitter (optional). The
SA-ZX3 supports up to three keypads per zone
and connects directly to the Keypad Port for that
zone. The CAT-5 for the keypads is run to a wall
plate, with RJ45 CAT-5 patch cables between the
wall plate and the SA-ZX3. Always use the RJ45
T568A CAT-5 wire configuration when connecting
keypads.
INSTALLER
19