Advertisement
http://new.abb.com/plc/control-panels/cp600-pro/software
Check under Downloads for Software for Demo projects.
To download the project to HMI, click on the menu Run/Download To Target.
Or you can find the button on the ribbon.
You can enter the target IP address manually, or you can click on the discovery button to list
all detected IP addresses in the same network.
Click Download, and then PB610 Panel Builder 600 will switch the CP600-Pro to Configuration
Mode and transfer the files.
NOTE: If the Runtime is not installed to CP600-Pro, PB610 Panel Builder 600 will promote to
Install Runtime
3AD R 0 10 16 1 , 1 , en _U S
8
Advertisement
