Table of Contents
Advertisement
Rear seats
Bench seat with fixed one-piece cushion and split backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot.
Folding the backrest
Move the corresponding front seat forward
if necessary.
Place the head restraints in the low
position (see "Rear head restraints").
Press control 1 forwards to release the
seat backrest 2 .
Fold the seat back 2 on to the cushion.
Repositioning the seat backrest
Straighten the seat backrest 2 and secure it.
Check that the red indicator, located next to
the control 1 , is no longer visible.
When repositioning the seat backrests, they
can be locked in one of two different positions,
depending on the speed in which the operation
is carried out:
-
if done quickly, the backrest returns to its
original position 1 ,
-
if done slowly, the backrest goes into the
vertical position 2 .
To go from position 2 to position 1 , simply
release the backrest and push it until it locks
in place.
Comfort
3
85
Advertisement
Table of Contents
