Front Head Restraints; Access To The Rear Seats - CITROEN E-MEHARI Handbook

Table of Contents

Advertisement

Never leave the seat backrest in the
reclined position while driving the vehicle;
the diagonal belt would not lie in an
effective position against the body.
Having the seat backrest in a reclined
position could increase the risk of serious
injury.
In the event of an accident, you could be
thrown against the belt and suffer injuries
to your neck or other serious or fatal
injuries.
Having the seat backrest in a reclined
position also increases the risk of being
thrown forward, slipping under the lap belt,
giving rise to serious internal injuries.
The seat backrest must be in the vertical
position to ensure effective protection
while driving.
It is essential to sit fully down in the seat
so that the lap seat belt is able to work
effectively in the event of an accident.
Driving with a seat in the "sleeping"
position is prohibited.
Adjust the seat to your wishes with the
backrest reclined no more than necessary
for comfort.
After adjustment, try to gently tip the seat
backrest back and forward to ensure that
it has locked into position.

Front head restraints

Adjusting a front seat head restraint:
-
To raise a head restraint, pull it upwards.
-
To remove the head restraint, press the lug
and pull the head restraint upwards.
-
To put it back in place, engage the head
restraint rods in the openings keeping them
in line with the seat backrest.
-
To lower it, press on the lug and on the head
restraint at the same time.
Never adjust the head restraints while the
vehicle is moving. Driving without the head
restraints in place is strictly prohibited.
https://www.automotive-manuals.net/
Ease of use and comfort
Before setting off, check that each
passenger's head restraint is present and
correctly adjusted.

Access to the rear seats

To access the rear bench seat of your
E-MEHARI: pull the seat tipping lever of one of
the two front seats.
Then tip the seat forward to give access to the
rear bench seat of your E-MEHARI.
To return the seat to the normal position: guide
the seat backrest to its initial position.
Ensure that the seat has latched home
correctly before moving off.
3
23

Advertisement

Table of Contents
loading

Table of Contents