Table of Contents
Advertisement
Back-up starting with the
electronic key
When the electronic key is in the defined zone
and your vehicle does not start after pressing
the " START/STOP " button:
Open the glove box.
Insert the electronic key in the location A .
Press the brake pedal on vehicles fitted
with a CVT gearbox or depress the clutch
pedal fully on vehicles with a manual
gearbox.
Press the " START/STOP " button.
Once the engine has started, you can
remove the electronic key from its
housing A and close the glove box.
The message is displayed
when you open the driver's
door and the electronic key
has not been removed from
its location A . Remember to take the electronic
key with you when you leave the vehicle.
Emergency stop with the
electronic key
In the event of an emergency only , the
engine can be stopped without any conditions.
To do this, press and hold the " START/
STOP " button for about 3 seconds or make
3 successive presses on the button.
The engine stops and the vehicle goes into
"ACC" mode.
During an emergency stop, the braking
servo assistance and steering power
assistance functions are no longer
provided. Take great care.
Driving
4
111
Advertisement
Table of Contents
