Table of Contents
Advertisement
Identifi cation markings
Various visible markings for the identification and tracing of your vehicle.
A. Manufacturer's plate.
It is riveted to the middle pillar, right hand
side and carries the following information:
- the name of the manufacturer,
- the European whole vehicle type
approval number,
- the vehicle identification number (VIN),
- the maximum authorised vehicle weight
(gross vehicle weight),
- the maximum authorised weight of
vehicle + trailer (gross train weight),
- the maximum front axle weight,
- the maximum rear axle weight.
B. Tyre label.
It is fixed to the middle pillar, driver's side
and carries the following information:
- the tyre sizes,
- the tyre pressures.
C. Vehicle identification number (VIN)
under the bonnet.
This number is engraved on the body near
the damper support.
Technical data
D. Vehicle identification number (VIN) at
the bottom of the windscreen aperture.
It is marked on a label visible through the
windscreen, left hand side.
The tyre pressures must be checked
when the tyres are cold, at least once
a month.
If the tyre pressures are too low, this
increases fuel consumption.
9
241
Advertisement
Table of Contents
