Table of Contents
Advertisement
Driving
Manual gear changing
In the automated mode, you can take over
control temporarily at any time using the
steering mounted controls.
The use of these controls permits manual
selection of the gears in situations which
require a faster change down than that offered
in automated mode (arrival at a roundabout,
exit from a car park with a steep gradient,
overtaking...).
The gearbox engages the gear requested if
the engine speed permits it. The gear engaged
appears.
To return to the automated mode, do one of the
following:
-
press the back of the "+/OFF" steering
mounted control 3 for approximately
2 seconds,
-
move the gear lever quickly towards
position +/- and then return it to position D ,
-
stop the vehicle.
118
Stopping the vehicle
Before switching off the engine, you must place
the gear lever in position P .
You must apply the parking brake to immobilise
the vehicle.
Operating fault
With the ignition on, if the message "Slow
down" or "Service required" appears in
the instrument panel screen, this indicates a
gearbox malfunction.
When a message is displayed, carry out the
following operations:
-
slow down and stop your vehicle in a safe
place,
-
place the lever in position P and let the
engine run,
-
open the bonnet to allow the engine to
cool.
If the message disappears for a long period,
you can set off again.
If the message remains displayed or appears
frequently, contact a CITROËN dealer or a
qualified workshop without delay.
Advertisement
Table of Contents
