Optional Pump Control Module Kit Operation
Screen Displays
Four screens are available. They are:
•
Pump Status Screen
•
Troubleshooting Screen
•
Depressurization Screen
•
Pump Control Module Screen (main screen)
Press F4 on the control panel to return to the
main screen anytime during operation.
F1 Pump Status Screen
F
. 12 Pump Status Screen
IG
Pressing the F1 key on the main screen displays the
Pump Status Screen. This screen indicates the status of
each pump. The screen displays the following possible
messages:
•
Active
•
Empty
•
Priming
•
Runaway
•
Depressurized
•
Ready
1. Select Prime when new material is loaded.
2. Select Crossover when necessary to manually
switch pumps.
12
Optional Pump Control Module Kit Operation
F2 Troubleshooting Screen
F
. 13 Troubleshooting Screen
IG
Pressing F2 on the main screen displays the trouble-
shooting screen. Any box that is solid black or flashing
black indicates a system error that must be corrected
before restarting. Any box that is solid black indicates
that input or output is out.
F3 Depressurization Screen
F
. 14 Depressurization Screen
IG
Pump is normally pressurized.
Pressing F3 on the main screen displays the Depressur-
ization Screen.
310766E