Troubleshooting - Craftsman CMCS500M1 Instruction Manual

90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of
your CRAFTSMAN Power Tool or Nailer for any reason, you
can return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-888-331-4569
for a free replacement.
PROBlEM
Unit will not start.
Unit starts immediately upon inserting battery.
Battery pack will not charge.
Unit shuts off abruptly.

TROUBLESHOOTING

POssiBlE CAUsE
Battery pack not installed properly.
Battery pack not charged.
The switch has been left in the "on" position.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot or too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life of the
battery pack it is designed to shutoff
abruptly when the charge is depleted.)
POssiBlE sOlUTiOn
Check battery pack installation.
Check battery pack charging requirements.
The switch must be moved to "off" to prevent
the tool from immediately starting when battery
is inserted.
Insert battery pack into charger until LED lights.
Plug charger into a working outlet. Refer to
Important Charging Notes for more details.
Move charger and battery pack to a surrounding
air temperature of above 40 °F (4.5 °C) or below
104 °F (+40 °C).
Allow battery pack to cool down.
Place on charger and allow to charge.
English
13