SAJ R5 Series User Manual page 20

14
17.6
Figure 4.4 Dimensions of rear panel of R5-15K/17K/20K-T2-AUS
4.4.2 Drill Holes and Place the Expansion Tubes
Follow the given guides, drill 3 holes in the wall (in conformity with position
marked in Figure 4.5 and 4.6), and then place expansion tubes in the holes using a
rubber mallet.
Figure 4.5 Drill holes' dimensions of R5-3K/4K/5K/6K/8K/9K/10K-T2-AUS
Figure 4.6 Drill holes' dimensions of R5-15K/17K/20K-T2-AUS
453
425
320
130
- 19 -
R5
Series
14
3-16*8