Cisco Card Cage and Backplane 7513-MX Replacement Instructions Manual page 22

Checking the System
Note
model and Cisco IOS software release being used.
If the power supplies do not start up, or if the system or any interfaces do not initialize properly, refer
to the Cisco 7500 Series Installation and Configuration Guide publication that shipped with your
router for additional information and installation troubleshooting procedures. If necessary, contact a
service representative. (See the "Cisco Connection Online" section on page 25.)
22 Cisco 7513, Cisco 7513-MX, and Cisco 7576 Card Cage and Backplane Assembly Replacement Instructions
Following is an example of this display:
(display text omitted)
GS Software (RSP-K), Version 10.3(571)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Wed 10-May-95 25:12
RSP2 (Risc 4600) processor with 16384K bytes of memory.
(display text omitted)
The preceding Cisco IOS software display examples may differ depending on the router