Miscellaneous Error Conditions - Lenovo ThinkSmart Hardware Maintenance Manual

Error code
0164
1762
8998
8999

Miscellaneous error conditions

Message/Symptom
Changing display colors
Hub will not power-off.
Hub will not RPL from server
Hub will not perform a Wake On LAN
34
ThinkSmart Hub Hardware Maintenance Manual
POST error message
Memory configuration change has
occurred
Storage device configuration change
has occurred
Not enough shadow RAM resources
for OPTION ROM, not all devices
initialized. Suggest to remove some
add-on cards, or change to UEFI
mode in BIOS setup.
Not enough PCIe/PCI MMIO
resources. Currently only one video
card is enabled. Remove some PCIe
cards.
FRU/Action
Display/Monitor
1. Power Switch
2. System Board
1. Ensure that the network is in startup sequence as the
2. Ensure that the network adapter is enabled for RPL.
3. Network adapter (Advise network administrator of
®
(if applicable)
1. Check the power supply and signal cable
2. Ensure that the operating system settings are set to
3. Ensure that the Wake On LAN feature is enabled in
4. Ensure that the network administrator is using the
5. Ensure no interrupt or I/O address conflicts.
6. Network adapter (advise network administrator of
Description/Action
This error message is displayed
when the memory size is
changed.
Press F10 to exit.
This error message is displayed
when a hard disk drive change or
an optical drive change has been
made.
Press F10 to exit.
This error message is displayed
when the shadow RAM resources
for option ROM are insufficient.
If the legacy option ROM is
insufficient, remove some add-in
cards.
For the system that supports
UEFI, set UEFI as the first priority.
This error message is displayed
when the PCIe/PCI MMIO
(memory mapped input/output)
resources are insufficient.
Remove some add-in cards.
first device or the first device after diskette.
new MAC address)
connections to the network adapter.
enable Wake on LAN.
Setup/Configuration.
correct MAC address.
new MAC address)