Advertisement
Quick Links
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
A high output effects machine that combines high density bubbles with a powerful fogger, to
produce a stunning smoke-filled bubble experience. The 12 bright LEDs on the front of the
unit can be used to highlight the torrent of bubbles, producing an exciting and colourful effect
that's ideal for parties and events. The unit itself is made from hardwearing steel, which
encases three fans for optimum air flow. It also comes complete with a fully functional wired
controller and smaller RF remote for simple wire-free operation and is DMX compatible for
more precise control.
•
900W Fogger produces up to 5000cuft/min
•
High output bubble machine with 10 wands
•
12 Bright 1W RGB LED's housed in the front panel
•
Wired Controller with button control and LCD display
•
10 Channel DMX compatible for more precise control
•
433Mhz keyfob-style RF wireless remote
•
1.2 Litre removeable fluid tank for fog machine
•
Quick drain tap at rear for bubble fluid
•
3 fans (1 front, 2 rear) for optimum air flow
www.avsl.com
LED BUBBLE FOG MACHINE 900W
QTFX-LBF1
Order ref: 160.555UK
User Manual
160.555UK Manual
Advertisement
Related Manuals for Qtx QTFX-LBF1
Summary of Contents for Qtx QTFX-LBF1
- Page 1 QTFX-LBF1 LED BUBBLE FOG MACHINE 900W Order ref: 160.555UK User Manual Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty A high output effects machine that combines high density bubbles with a powerful fogger, to produce a stunning smoke-filled bubble experience.
- Page 2 It is also recommended to use fog machine cleaning fluid (160.670UK) periodically. Recommended Fluids: The QTFX-LBF1 requires both fog fluid in the fluid tank and bubble fluid in the reservoir. For the efficient use of this unit we recommend the following QTX fluids:...
- Page 3 Rear Panel: Setting Up: Unpack the QTFX-LBF1 unit. Unscrew the top cap of the fluid tank and remove to fill with fog fluid. Replace the bottle and screw the cap securely, making sure that the pipe is fed down to the bottom of the bottle to ensure a consistent flow of fluid.
- Page 4 MANUAL: Press and release for fog on demand The menu options displayed on the wired remote are as follows: Function Selection Content Heating status Warming Up Unit warming up please wait Ready to Work Unit is ready to use Bubble control Bubble ON Bubble flow on Bubble OFF...
-
Page 5: Specifications
Channel Value Content 0-255 Fog effect (low to high) 0-255 Bubble effect (low to high) 0-255 Bubble height and fan speed increase 0-255 Bubble volume and fan speed increase 0-255 Red LED (low to high) 0-255 Green LED (low to high) 0-255 Blue LED (low to high) 0-255... - Page 6 This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines Errors and omissions excepted. Copyright©...