Fantasea Line FG7X II S Instruction Manual page 21

c. Attach the flash diffuser quick release secure string to the other side of the string connected
to the housing in order to avoid losing the flash diffuser underwater.
d. In order to remove the flash diffuser from the housing, gently push it outwards first from its
top and then from the bottom.
4. It is best to set the camera flash mode to "Flash Always" as artificial light is required in most
compositions for the purpose of color and light reproduction. This will ensure the built-in camera
flash fires on every image taken regardless of ambient light available. Please refer to the camera
instruction manual for further instructions regarding such settings.
5. Rotate the Flash Up Switch clockwise (pulling it toward the back of the housing) in order to pop up
the camera built-in flash.
6. Note that once the camera's built-in flash has been popped up it can be turned off using the Flash /
Right control and selecting the "Off" option. Rotating the Flash Up Switch counterclockwise will not
have any effect on the built-in flash.
FG7X II S Housing Instruction Manual 20220601
21