Setting The Clock; Clock Setting; Auto Clock Setting - Sharp DV-RW370S Operation Manual

Vcr/dvd recorder combination

Hide thumbs Also See for DV-RW370S:

Operation manual (103 pages)

Operation manual (101 pages)

Table Of Contents

100

101

102

103

Table of Contents

Clock Setting

In stop mode, press [SETUP].

Select "Clock" using [Cursor

K / L], then press [ENTER].

Select "Clock Setting" using

[Cursor K / L], then press

[ENTER].

Clock Setting

-- / -- / ---- ( --- )

Press [ENTER] again.

Default date will appear.

Clock Setting

01 / 01 / 2006(SUN)

Auto Clock Setting

Channel Presetting must be set

before the Auto Clock is set.

To set the clock automatically,

the channel assigned to position

01 must have the PDC signal.

In stop mode, press [SETUP].

Select "Clock" using [Cursor

K / L], then press [ENTER].

Select "Auto Clock Setting"

using [Cursor K / L], then press

[ENTER].

Option window will appear.

Auto Clock Setting

OFF

The default is "ON".

Downloaded from:

http://www.usersmanualguide.com/

Getting started

Enter the date (day / month /

year) using [Cursor K / L].

Press [Cursor B] to move the

cursor to the next field. If you

wish to go back to the previous

field, press [Cursor {].

Enter the time (hour / minute)

using [Cursor K / L], then

press [ENTER].

VCR

DVD

-- : --

The clock will start.

• Although seconds are not

displayed, they will be counted

from zero.

VCR

DVD

Press [SETUP] to exit.

0 : 00

Select "ON" using [Cursor

K / L], then press [ENTER].

Press [SETUP] to exit.

Press [ OPERATE] to turn off.

This unit will search for the clock

time only when the power is off.

Leave it off for several minutes

to give this unit time to set the

clock on the front display panel.

Note

• The clock cannot be set automatically if you are not receiving a channel

VCR

DVD

that carries a time signal in your area. In this case, set the clock manually.

• Once the auto clock setting is performed, the unit will correct the current

time by receiving VPS / PDC broadcasts whenever you turn off the unit.

• The unit will correct the current time automatically at 8:00, if the unit

power is turned off.

• Between 23:00~1:00, the Auto Clock function does not work even if the

unit power is turned off.