Related Manuals for Stanley BRANDON OIL MK3
Summary of Contents for Stanley BRANDON OIL MK3
- Page 1 Waterford Stanley Ltd. Bilberry, Waterford Ireland. T el: (051) 302300 Fax: (051) 302375 BRANDON OIL MK3 FAN FLUE KIT INSTALLATION MANUAL...
- Page 2 POSITION OF FAN FLUE TERMINAL FOR OIL FIRED COOKERS OIL FIRED COOKERS Directly below an opening, air brick, window etc.. Horizontally to an opening, air brick, window etc.. Below a gutter, eaves or balcony with protection Below a gutter or a balcony without protection From vertical sanitary pipework From an internal or external corner Above ground or balcony level...
- Page 3 BRANDON FAN FLUE KIT ASSEMBLY AND INSTALLATION SEE LIST OF CONTENTS WHEN ITEM NUMBERS ARE REFERRED TO: STEP 1. Cut the Air inlet duct (item 5) to the required Remove the cover plate from the Air inlet back length, allowing for the connection to the panel by removing the fixing screws.
- Page 4 CONNECTION OF FAN FLUE TO COOKER STEP 6. Connect the air inlet terminal (item 6.) to the Isolate from mains before carrying out any flexible duct (item 5.) and secure using work. remaining jubilee clip (item 7). Screw the (item 3) terminal guard fixing Remove both control boxes (boiler and oven) brackets to the wall and bolt terminal wire guard by undoing the clips on each side of the...
- Page 5 NON STANDARD WALL THICKNESS taking care that no damage occurs. Select the thick- ness required and cut through the assembly on the There is an extended flue assembly available (to inner most of the paired groves. Care must be taken order) that is suitable to be installed through wall to cut straight and to remove all sharp edges.
- Page 6 BRANDON FAN FLUE OIL WIRING DIAGRAM Fig.8...
- Page 7 Waterford Stanley Ltd, Bilberry, Waterford, Ireland. T elephone: (051) 302300 Facsimile: (051) 302375 N00370AXX...