La Sommeliere CTVNE142A Instruction Manual page 37

Table of Contents

Advertisement

Available languages

Available languages

Fixed shelves installation
The notch wood must be at the rear. For wire shelves, the wood panel must be in the front.
Presentation shelves installation (accessories option)
Position the shelf presentation on the level above a fixed shelf. Being less deep, it will allow you to position
your bottles on the fixed shelf and let it rest on the edge of the shelf presentation.
Sliding shelves installation (accessories option)
1. Place the rack in the right direction.
2. Install the shelf with two rails in molded from the basement to the bottom supports.
3. Set the bar at the bottom between the shelf and molding the above, this will block the rails on the
sides and thus to be able to slide the shelf
36

Advertisement

Table of Contents
loading

Table of Contents