fantastic furniture Cove Manual page 5

Step 1
You will need
8 x Cam Bolts Phillips Head
(H3) Screwdriver
H3
Attach 8 x Cam Bolts (H3) to Top Panel (P1) as shown. Tighten with a Phillips Head Screwdriver.
Step 2
You will need
8 x Dowels 8 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into Top Panel (P1). Insert 8 x Cam Nuts (H4) into Left & Right Side
Panel (P3 & P4) and Dividers (P5, P6) as shown. Rotate the cam nuts so the arrow points
towards the incoming cam bolts. Attach Left & Right Side Panel (P3 & P4) and
Dividers (P5, P6) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au
H3
H3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H4
H1
(P4)
H4
H1
H1
H3
H3
(P1)
(P5)
H1
(P6)
H4
H1
Note: ensure the grooves on
the Top Panel (P1), Left & Right
Side Panels (P3 & P4) and
Dividers (P5, P6) align as shown.
H3
H3
H3
H4
H1
H4
H1
(P1)
(P3)
H4
H1
Page 5