Table of Contents
Advertisement
LPWA Module Series
and must not transmit simultaneously with any other antenna or transmitter.
L'autre utilisé pour l'émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm
de toutes les personnes et ne doit pas être colocalisé ou fonctionner conjointement avec une autre
antenne ou un autre émetteur.
To comply with IC regulations limiting both maximum RF output power and human exposure to RF
radiation, maximum antenna gain (including cable loss) must not exceed:
❒ Catm LTE Band2/25:≤11.000dBi
❒ Catm LTE Band4/66:≤8.000dBi
❒ Catm LTE Band5/26:≤12.541dBi
❒ Catm LTE Band12:≤11.798dBi
❒ Catm LTE Band13:≤12.214dBi
❒ Catm LTE Band85:≤11.798dBi
❒ NB LTE Band2/25:≤11.000dBi
❒ NB LTE Band4/66:≤8.000dBi
❒ NB LTE Band5:≤12.541 dBi
❒ NB LTE Band12:≤11.798dBi
❒ NB LTE Band13:≤12.214dBi
The host product shall be properly labelled to identify the modules within the host product.
The Innovation, Science and Economic Development Canada certification label of a module shall be
clearly visible at all times when installed in the host product; otherwise, the host product must be
labeled to display the Innovation, Science and Economic Development Canada certification number for
the module, preceded by the word "Contains" or similar wording expressing the same meaning, as
follows:
BG950A-GL&BG951A-GL_Hardware_Design
88 / 84
Advertisement
Table of Contents
